Alpro Equipments & Technologies

Tray Dryer

1) CONSTRUCTION:

EXTERNAL:2MM THKINTERNAL:2MM THKMOC: cGMP

2) SURFACE FINISH :

EXTERNAL: Buffed to 150 grit matt finish INTERNAL: Buffed to 220 grit mirror finish.

3) INLET & OUTLET:

All dryers have a 5 micron pre filter r at the inlet and a manually infinite adjustable damper at the outlet.

4) DOOR:

Doors at provided at the front and / or rear side of the tray dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors.

5) AIR CIRCULATION:

Air circulation is done by specially designed recirculation blowers inside the tray dryer. The blower capacity, static & design depends on the size and model of dryer.

6) HEATING:

Dryers are normally supplied with either steam/ electric/ thermic fluid / hot water heating system. Suitable heating coils / clarifiers are provided in the dryers.

7) TEMPERATURE CONTROL:

Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.

8) TRAYS:

Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with cooved corners. Trays are buffed to mirror finish. Trays are also available in aluminium / Polypropylene / Frp/ M.S. galvanized as per clients requirements.

9) TROLLEY:

Trolley is provided in the dryers to accommodate trays in it. Trolley truck are used to load and unload the trays into the dryer.

10) CONTROL PANEL :

Automatic Control panel is fitted on the side of the dryer. If consists of Starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons , timers, controllers etc.

Technical Specification

MODELS	TD-12	TD-24	TD-48	TD-96
Loading capacity	12 Trays	24 Trays	48 Trays	96 Trays
External Dimension in mm	W D H 1370x530x 940	W D H 1370x940x 940	W D H 1980x1020x1880	W D H 3320x1900x1880
Internal Dimension In mm	840x430x840	840x860x840	1020x930x1830	1960x930x1830
No of Doors	One	One	One	Two
No of Blowers	One	Two	One	Two
No of motors/H.P.3 PHASE 415 VOLTS.	1/0.5 H.P./3 phase 415 volts.	1/0.5 H.P./3 phase 415 volts	1/1 H.P./3 phase 415 volts	2/1 H.P./3 phase 415 volts
Electrical Heating Load for100°C/200°C/300°C	3kw/6kw/9kw	6kw/9kw/12kw	9kw/15kw/18kw	15kw/21kw/27kw
Steam Heater No. of coils.	2	2	2	2
Steam Pressure	3.3 kg/cm2	3.3 kg/cm2	3.3 kg/cm2	3.3 kg/cm2
Steam consumption	25 LBS/hr	45 LBS/hr	60 LBS/hr	80 LBS/hr
Insulation in mm100°C/200°C/300°C	50/75/75	50/75/75	50/75/75	50/75/75
No of Trolleys	Rack System	Rack System	One	Two
Tray Size	812x 406 x 31	812x 406 x 31	812x 406 x 31	812x 406 x 31
Trolley Dimension	Fixed Racks	Fixed Racks	840x960x1780	840x960x1780