Paint & Constructions
| Product | Type | Visocity | PH | Download Link |
| AOPL C 76 | WATERPROOFING ACRYLIC EMULSION | - | 8.5-9.5 | Click to Download |
| AOPL C400 | FLEXIBLE CEMENTITIOUS EMULSION | 1700 - 3000 cP | 7.0-8.5 | Click to Download |
| AOPL EM 50 | Polyvinyl Acetate Dispersion | 50000 to 70000 cP | 5.0-6.0 | Click to Download |
| AOPL MURA C 55 | ACRYLIC BINDER FOR ELASTOMERIC ROOF COATING AND MASONRY COATINGS | 1000 cP max | 7.5-8.5 | Click to Download |
| AOPL PA 561 | Pure Acrylic 50% | 400 to 500 cP | 8 ~ 10 | Click to Download |
| AOPL P DEF | Silicone Defoamer | 6000 to 8000 cP | 5.5 ~ 7 poise (approx.) | Click to Download |
| AOPL P DIS | Dispersing Agent | 120 to 150 cP | 7.5 ~ | Click to Download |
| AOPL PS 259 | Styrene Acrylic 48% | 1500 to 2000 cP | 8 ~ 10 | Click to Download |
| AOPL PS 504 | Styrene Acrylic 50% | 6000 to 8000 cP | 8 ~ 9 | Click to Download |
| AOPL PS 3045 | Styrene Acrylic 45% | 1500 to 2000 cP | 8 ~ 10 | Click to Download |
| AOPL PVB 55 | Vam Acrylate Copolymer | 500 to 1000 cP | 4 - 5 | Click to Download |
| AOPL PVV 50 | VAM VEOVA ter polymer emulsion | 2000 - 3000 cP | 3.5 - 5.5 | Click to Download |
| AOPL PVV 55 | VAM VEOVA TER POLYMER 55 % | 3000 - 4000 cP | 4 - 6 | Click to Download |
| AOPL PT 29 | ALKALI SWELLABLE ACRYLIC THICKENER | 2000 cP Minimum | 2? 4 | Click to Download |
AOPL C 76 WATERPROOFING ACRYLIC EMULSION
AOPL-76 IS A MODIFIED ACRYLIC POLYMERDESIGNED FOR CEMENTITIOUS COMPOSITIONS AN EXCELLENT WATER PROOFING CHEMICAL.
• COMPARED WITH UNMODIFIED CEMENT MORTARS AOPL-76 MODIFIED MORTARS HAVE BETTER FLXURAL,COMPRESSIVE AND IMPACT STRENGTH BESIDES EXCELLENT ABRASION RESISTANCE.
• AOPL-76 IS WIDELY USED FOR WATERPROOFING OF TERRACES,ROOFTOPS,BASEMENTS AND CRACKFILLING.
• AOPL-76 EXHIBITS EXCELLENT ADHESION TO CONCRETE,MASONRY,BRICK,WOOD,METALS,ETC. WHEN USED WITH WHITE CEMENT.
• THIS UNIQUE CHEMICAL IS RESISTANT TO HEAT,UV AND CHEMICALS.
SPECIFICATIONS :
APPEARANCE : WHITE MILKY LIQUID
SOLIDS : 45-47%
pH : 8.5-9.5
SPECIFIC GRAVITY : 1.03-1.05
FREEZE THAW STABILITY : 5 CYCLES
FORMULATION TECHNIQUES :
1. FOR CEMENTITIOUS COMPOSITIONS
BLEND 10 PARTS OF AOPL-76 WITH 100 PARTS OF WATER AND THEN ADD A PREBLEND OF SILICIOUS SAND-200 PARTS AND CEMENT 100 PARTS SLOWLY WITH STIRRING AND GET CONSISTENCY AS DESIRED BY ADDING EXTRA WATER IF REQUIRED. THIS SHOULD BE APPLIED ON PRECLEANED SURFACES AND STANDARD CURING PROCEDURE TO BE USED.
2. FOR WATER PROOFING
MIX 2.5 KG OF AOPL-76 WITH 2.5 KG WATERAND SLOWLY ADD 50 KG WHITE CEMENT AND MIX WELL FOR ADDITIONAL PROTECTION FROM WATER SEEPAGE ONE CAN MAKE A UNIFORM FILM OF AOPL-76 ON THE SURFACE BEFORE APPLYING THE MIXTURE OF AOPL-76 AND WHITE CEMENT.
3. FOR EXTERIOR PAINT
USE ABOUT 5% OF THE TOTAL PAINT THE AOPL-76, THIS WILL GIVE A FASTDRYING CLEAR GLOSSY EXTERIORS.
AOPL –C400 FLEXIBLE CEMENTITIOUS EMULSION
AOPL-C400 IS A MODIFIED ACRYLIC POLYMER DESIGNED FOR CEMENTITIOUS COMPOSITIONS AN EXCELLENT WATERPROOFING CHEMICAL.
• COMPARED WITH UNMODIFIED CEMENT MORTARS AOPL-C400 MODIFIED CEMENT MORTARS HAVE BETTER FLEXURAL, COMPRESSIVE AND IMPACT STRENGTH BESIDES EXCELLENT ABRASION RESISTANCE.
• AOPL-C400 IS WIDELY USED FOR WATERPROOFING OF VERTICAL SURFACES WHERE CRACKS OCCUR DUE TO THERMAL EXPANSION AND CONTRACTIONS.
• AOPL-C400 EXHIBITS EXCELLENT ADHESION TO CONCRETE, MASONRY, BRICK, WOOD, METALS ETC WHEN USED WITH WHITE CEMENT.
• EXCELLENT BARRIER COATING AND ALSO FINDS SUITABILITY AS TILE ADHESIVE
SPECIFICATIONS:
VISUAL APPEARANCE : WHITE MILKY EMULSION
SOLIDS : 53-55%
VISCOSITY
RVT SPLINDER NO 4 : 1700 - 3000 cP
SPEED 10 RMP
pH : 7.0-8.5
GLASS TRANSITION TEMP (CALC) : -5 DEG C
FREEZE THAW STABILITY : 5 CYCLES
FILM PROPERTIES : HIGHLY TACKY, FLEXIBLE, CLEAR
AOPL – EM 50 Polyvinyl Acetate Dispersion
Type : Vinyl acetate homopolymer
Visual Appearance : White Dispersion
Solids : 48-50%
Viscosity @ 30ºCby
Brookfield RVT : 50000 – 70000 cP
Spindale No 7 RPM 20
pH : 5.0-6.0
MFFT : 14 deg c
Film : Clear hard film, free from bits
AOPL EM 50 can be used for low cost semi gloss paint applications for interior paint applications and also for cementitious substrates.
AOPL MURA C 55 ACRYLIC BINDER FOR ELASTOMERIC ROOF COATING AND MASONRY COATINGS
AOPL MURA55 is a new generation Acrylic copolymer dispersion, Apeo free and formaldehyde freedesigned for high performance elastomeric coating on roofings.
AOPL MURA55 latex is developed as a high performing, high tensile strength polymer that, when formulated into a Elastomeric Roof Coating formulation, delivers improved toughness and hail resistance Coatings ,with excellent adhesion to polyurethane foam and a variety of other construction and roofing substrates.
TYPICAL DATA:
Total Solids : 55.0-57.0
PH : 7.5-8.5
Viscosity @ 23 0C : 1000 cP max
Brookfield RVT
Spindale No 7
RPM 20
TYPICAL PROPERTIES:
Particle Size, microns : 0.3-0.5
MFFT 0C, approx : 0
Glass Transition Temperature (ONSET) : -35 0C
Specific Gravity Dispersion : 1.03-1.04
Features
100% acrylic composition -------- Outstanding exterior durability
Dirt-resistant chemistry -------- Maintains attractive appearance
Low glass transition temperature -------- maintains flexibility and bridge cracks
Permeable to water vapor -------- Permits water vapor in substrate to escape
Ultraviolet resistance -------- Improves chalk resistance and tint retention
Permanently flexible -------- eliminates the need for external plasticizer
Waterborne -------- Simple handling and cleaning
Application guidelines for using
Formulation– Masonry Restoration Paint (40% PVC)
Material Name : KG
Natrosol 250 MR (3.0%) : 100.0
Water : 50.0
Dispersing agent (30.0%) : 7.0
KTPP (100.0%) : 1.0
Propylene Glycol : 23.9
Nonionic emulsifier : 4.0
Preservative : 1.6
Nopco NXZ : 2.0
fungicide : 6.5
Ti-Pure R-706 : 200.0
Duramite : 250.0
Grind for approximately 15 minutes then letdown with minimum agitation. Before letdown, reduce to slow speed and add the AOPL MURA55 polymer. Continue agitation at a low speed while adding the other ingredients. Upon completion of all additions, reposition the impeller to maintain a good vortex. Mix for 5 minutes.
AOPL MURA55 : 400
Texanol : 6
Nopco NXZ : 2
Aqueous Ammonia (28%) : 2
Natrosol 250 MR (3.0%) : 115
Total : 1170
PVC : 40.1
Volume Solids : 40.9
Weight Solids : 56.9
VOC, g/l : 83
Formulation– ELASTOMERIC WALL COATING (35% PVC)
Material Name : KG
Natrosol 250 MHR (2.5%) : 108.0
Dispersing agent (30.0%) : 5.0
Propylene Glycol : 19.0
Nonionic emulsifier : 4.5
Preservative : 1.5
Nopco NXZ : 3.6
Fungicide : 6.5
Ti-Pure R-960 : 100
Duramite : 325
Grind for approximately 15 minutes then letdown with minimum agitation. Before letdown, reduce to slowspeed and add the AOPL MURA 55 polymer. Continue agitation at a low speed while adding the otheringredients. Upon completion of all additions, reposition the impeller to maintain a good vortex. Mix for 5 minutes
AOPL MURA55 : 528
Texanol : 6.0
Nopco NXZ : 3.0
Aqueous Ammonia (28%) : 1.0
Natrosol 250 MR (3.0%) : 18.5
Thickener : 2.0
Water : 2.0
Totals : 1134
PVC : 35.1
Volume Solids : 50
Weight Solids : 63
VOC, g/l : 56
HEALTH & SAFETY:
Please refer to the Material Safety Data Sheet for safety and environmental information. AOPL MURA55 is not classified as dangerous .
STORAGE & HANDLING:
Store at an even temperature of between +5 0C and +32 0C avoiding frost and direct sunlight. Stir product before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 6 months .
AOPL PA 561 Pure Acrylic 50%
Chemical type : Pure Acrylic
Visual Appearance : Milky white
Solid content : 50 +/- 1%
Viscosity @ 30 C
Brookfield RVT : 400 – 500 cP
Spindale No 4
RPM 10
pH : 8 ~ 10
Free monomer content : < 0.3%
MFFT : 18°C
Properties : Surfactant stabilized fine particle size, excellent binding, good wet scrub, excellent color retention. UV resistant & low dirt pick-up.
Recommended Applications : For use in high sheen/high gloss, premier quality interior/exterior paint.
AOPL P DEF Silicone Defoamer
Chemical Type : Defoamer
Visual Appearance : Thick White Emulsion
Chemical Composition : Dimethyl Polysiloxane
Viscosity @ 30 C
Brookfield RVT : 6000 – 8000 cP
Spindale No 4
RPM 10
pH at 2% : 5.5 ~ 7 poise (approx.)
Suitable Dilutants : Soft water
Defoaming : 9 sec. (approx.)
Uses of Defoamer : Textile Industry
Paper Industry, Dye Manufacturing Industry, Laundries, Paint Industry, Effluent Treatment Plants
Recommendations : It is advisable to add AOPL DEF to any bath before agitation
AOPL P DIS Dispersing Agent
Chemical type : Disperser
Visual Appearance : Water white
Solid content @ 120 °C for 2 hours : 39% - 41%
Viscosity @ 30 C, on BF-RVT (SP-4, 10 RPM) : 120 – 150 cP
pH : 7.5 ~ 9
Diluents : Water
Uses of dispersant : AOPL DIS is a pigment dispersant for aqueous systems. It is a low foaming dispersant, especially useful for dispersing inorganic pigments such as titanium dioxide, zinc oxide, clay with improved stability. It is efficient in a wide range of pH in various emulsion systems.
AOPL PS 259 Styrene Acrylic 48%
Chemical type : Styrene Acrylic
Visual Appearance : Milky white
Solid content : 48 +/-2%
Viscosity @ 30 C
Brookfield RVT : 1500 – 2000 cP
Spindale No 7
RPM 20
pH : 8 ~ 10
Free monomer content : < 0.3%
MFFT : 17°C
Properties : Forms a hard, tough, flexible & glossy film. Excellent wet scrub & abrasion resistance. Excellent pigment loading characteristics. Alkali resistant.
Recommended Applications : For use in low cost distemper/interior emulsion paints, cement primer & putty.
AOPL PS 504 Styrene Acrylic 50%
Chemical type : Styrene Acrylic
Visual Appearance : Milky white Viscous Emulsion
Solid content : 50 +/- 1%
Viscosity @ 30 C
Brookfield RVT : 6000 - 8000 cP
Spindale No 4
RPM 10
pH : 8 ~ 9
Free monomer content : < 0.3%
MFFT : 18°C ca
Properties : Forms a hard, tough, flexible & glossy film. Excellent wet scrub & abrasion resistance. Excellent pigment loading characteristics. Alkali resistant.
Recommended Applications : For use in superior quality exterior/interior emulsion paints with high sheen, textured coating & in construction chemicals.
AOPL PS 3045 Styrene Acrylic 45%
Chemical Type : Styrene Acrylic
Visual Appearance : Milky White
Solid Content : 45 +/- 2%
Viscosity @ 30 ºC
Brookfield RVT : 1500 – 2000 cP
Spindale No 4
RPM 10
pH : 8 ~ 10
Free Monomer Content : < 0.3%
MFFT : 18 ºC
Properties : Forms a hard, tough, flexible and glossy film. Excellent wet scrub and abrasion resistant. Excellent pigment loading characteristics, alkali resistant. Can replace 50 % s/a by same volume.
Recommended Applications : For use in low cost washable distemper/ interior emulsion paints /cement primer. Can be use for economical exterior paint
AOPL PVB 55 Vam Acrylate Copolymer
Type : Vam Acrylate Copolymer
Stabilizer : Colloid / Surfactant
Visual Appearance : Milky white
Solids : 55 ± 1 %
Viscosity @ 23 0C
Brookfield RVT : 500 – 1000 cP
Spindale No 4
RPM 10
Ph : 4 - 5
MFFT : + 7 deg c
Particle Size : 0.2 – 0.3 micron
Film : Medium hard, glossy & non tacky
Applications : Interior flat paint formulations
AOPL PVV 50 VAM VEOVA ter polymer emulsion
AOPL –V50 is a new generation, economical paint binder based on versa tic acid ester terpolymer. It can be used for both interior and exterior paints with good wet scrub resistance and hydrophobicity.
Physical data:
Type : Vinyl Acetate Veova Terpolymer
Visual Appearance : Milky white
Solids : 48-50%
Viscosity @ 23 0C
Brookfield RVT : 2000 - 3000 cP
Spindale No 4
RPM 10
Ph : 3.5 - 5.5
MFFT : 14 deg c
Film : Clear hard film, free from bits
AOPL V50 can be used for semi gloss paint applications for both interior and exterior paint applications and also for cementitious substrates.
AOPL PVV 55 VAM VEOVA TER POLYMER 55 %
Solid : 55± 1 %
Visual Appearance : Milky white
Viscosity @ 30ºCby
Brookfield RVT : 3000 - 4000 cP
Spindale No 4
RPM 10
MFFT : 12 º C
pH : 4 - 6
Type of Applications : Binder for Interior & exterior emulsion Paints
Characteristics : High Pigment Loading Capacity, Very good wet scrub resistance, Good colour development & superior weatherability
AOPL PT 29 ALKALI SWELLABLE ACRYLIC THICKENER
Introduction AOPL-T29 is a cross linked acrylic co-polymer. Upon addition of a base/alkali the diluted emulsion particles swell. Under these conditions the thickened emulsion clarifies and become highly viscous. These solutions of thickener are similar to solutions of natural gums of higher viscosity grades. The advantage over natural gums is that handling is much simpler as it is in liquid form. Solutions of this thickener suspend pigments and abrasives. AOPL –T29 is ideal for thickening various emulsions used in Textiles, Carpet, Paint and Leather industry.
Technical Data
Visual Appearance : White Milky Emulsion.
Solids : 28.5 % - 29.5 %
pH : 2– 4
Charge : Anionic
Solution Viscosity
1 % Sodium salt : 2000 cP. Minimum.
Salt preparation method: 1 % sodium salt: add 3.3 parts thickener and dilute with 95 parts of water and neutralize with 1.7 parts of 10 % NaOH
Note : 5 % solids level is the maximum concentration for working as above this the viscosity shoots up into an unworkable gel.
AOPL-T29 can readily thicken in the presence of ammonia or other alkali solutions at a ph of 7.5-8.0.
Application
AOPL-T29 can replace natural gums which are difficult to handle.
It is possible to introduce AOPL-T29 directly into the system to be thickened without pre neutralization.
Thickened Solutions of AOPL-T29 can effectively suspend pigments, abrasives and other fine particles.
Advantages
Conventional thickeners have a flocculating action whereas AOPL-T29 does not.
Useful for in situ thickening.
It can also replace partially kerosene usage.
Precautions
Always dilute with water before using.