Paper Industry
| Product | Type | Visocity | PH | Download Link |
| AOPL 2259 | STYRENE ACRYLIC 50% | 1000 - 2000 cP | 8 ~ 10 | Click to Download |
| AOPL 2504 | Styrene Acrylic 50% | 750 cP | 8 ~ 10 | Click to Download |
| AOPL P DEF | Silicone Defoamer | 6000 to 8000 cP | 5.5 ~ 7 poise (approx.) | Click to Download |
| AOPL P DIS | Dispersing Agent | 120 to 150 cP | 7.5 ~ 9 | Click to Download |
| AOPL - P252 | Polymer dispersion for clay coating | 30 to 40 cP | 6.0-7.0 | Click to Download |
AOPL 2259 STYRENE ACRYLIC 50%
Chemical type : Styrene Acrylic
Visula Appearance : Milky white
Solid content : 48 +/- 2%
Viscosity @ 30 C : 1000 - 2000 cP
pH : 8 ~ 10
Free monomer content : < 0.3%
Tg. : 9 °C
Properties : It has good wet and dry pick resistance, better heat and mechanical stability. Very good sheets gloss, smoother surface, improved opacity and brightness, improved print gloss.
Recommended Applications : AOPL 2259 can be used as such or along with oxidized starch or casein as natural binders in coating formulations. It is compatible with china clay, calcium carbonate, whiting, titanium dioxide and most other standard pigments.
IT IS MAINLY USED FOR DUPLEX PAPER BOARD
AOPL 2504 Styrene Acrylic 50%
Chemical Type : Styrene Acrylic
Appearance : Milky White
Solid Content : 50 +/- 1%
Viscosity @ 30ºCby : 750 cP
Brookfield RVT
Spindale No 7
RPM 20
pH : 8 ~ 10
Free Monomer Content : < 0.3%
Tg. : 12 ºC
Properties : It has good wet and dry pick resistance, better heat and mechanical stability. Very good sheet gloss, smoother surface, improved opacity and brightness, improve Print gloss.
Recommended Applications : Aopl 2504 is specialized fine particle size binder used for clay coating formulations. It is compatible with china clay, calcium carbonate, whiting, titanium dioxide and most other standard pigments. IT IS MAINLY USED FOR DUPLEX PAPER BOARD.
AOPL P DEF Silicone Defoamer
Chemical Type : Defoamer
Visual Appearance : Thick White Emulsion
Chemical Composition : Dimethyl Polysiloxane
Viscosity @ 30 C : 6000 – 8000 cP
Brookfield RVT
Spindale No 4
RPM 10
pH at 2% : 5.5 ~ 7 poise (approx.)
Suitable Dilutants : Soft water
Defoaming : 9 sec. (approx.)
Uses of Defoamer : Textile Industry, Paper Industry, Dye Manufacturing Industry, Laundries, Paint Industry,Effluent Treatment Plants
Recommendations : It is advisable to add AOPL DEF to any bath before agitation
AOPL P DIS Dispersing Agent
Chemical type : Disperser
Visual Appearance : Water white
Solid content @ 120 °C
for 2 hours : 39% - 41%
Viscosity @ 30 C, on BF-RVT
(SP-4, 10 RPM) : 120 – 150 cP
pH : 7.5 ~ 9
Diluents : Water
Uses of dispersant : AOPL DIS is a pigment dispersant for aqueous systems. It is a low foaming dispersant, especially useful for dispersing inorganic pigments such as titanium dioxide, zinc oxide, clay with improved stability. It is efficient in a wide range of pH in various emulsion systems.
AOPL – P252 Polymer dispersion for clay coating
AOPL –P252 is a new generation, economical paper coating binder based on butyl acrylate versa tic acid ester terpolymer. It can be used to impregnate paper sheets used in the manufacture of laminates, wallpapers and filters. It gives good water resistance, solvent resistance and dimensional stability.
Physical data:
Type : Butyl Acrylate based terpolymer
Visual Appearance : Milky white
Solids : 50% ± 2
Viscosity @ 30ºCby : 30 – 40 cP
Brookfield RVT
Spindale No 7
RPM 20
ph : 6.0-7.0
mfft : 14 deg c
Film : Clear hard film, free from bits
AOPL P252 can be used in the conventional methods such as size press, film press, curtain coating and dipping. Preferred drying temperature can be 110-120 deg c. For extra dimensional stability urea formaldehyde can be used.