R-Mark Water Based Acrylic Road Marking Paint
Product Description - Indian Paint's R-Mark Water Based Acrylic Road Marking Paint is single pack, air drying, acrylic water based road marking paint. Having fast drying properties. Suitable for direct application on asphalt and concrete roads. Good wear and weathering resistance. Recommended as kerb marking paint.
Technical Data
| Coverage : | On asphalt surface 130 - 140 Sq.Ft. / Ltr at 25 microns On concrete surface 90 - 100 Sq.Ft / Ltr at 35 microns |
| Drying time : | Surface dry 20 Minutes Hard dry 1 hr. |
| Gloss level / Sheen levels : | Gloss |
| Volume solids : | Approximate 35°C |
| Over coating interval at 30°C : | Minimum 45 minutes Maximum Unlimited, Provided surface is dry and clean from all Contamination |
| Flash point : | Not applicable |
| Stability of thinned paint : | Use within 24 hrs. |
| Shelf-life : | 1 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat |
Direction For Use - Ensure that the road surface is clean, free from dust, oil and grease. Heavy deposit of earlier paint or thermoplastic should be removed. Wire brushing and water washing is recommended for removal of dust from the road surface. The surface should be thoroughly dry and free from moisture before painting. Surface temperature must be must be at least 30C above dew point but not above 500C. Do not paint of temperature below 100C or at relative humidity over 850C. Under cold and humid condition the paint would required longer drying time. Two coat application is recommended for optimum performance
Mixing Directions
| Brush | Recommended Thinner : Volume Of Thinner : |
Municipal / Potable Water 5 -15% |
| Air Spray | Recommended Thinner : Volume Of Thinner : Nozzle Orifice : Nozzle Pressure : |
Municipal / Potable Water 10 - 30% 1.5 - 3.0 Mm 0.3 - 0.49 Mm |
| Airless Spray | Recommended Thinner : Volume Of Thinner : Nozzle Orifice : Nozzle Pressure : |
Municipal / Potable Water 5 - 15 % 0.33 - 0.49mm 12 - 15 Mpa (Approx 120 - 150 Atm; 1700 - 211 P.S.I) |
Available Packaging - Plastic Buckets - 20 Liters, 10 Liters
