POLYMITE

Polymite is available in packing of 200 ml, 1 Liters, 5 Liters and 20 Liters.

Polymite is an antitermite admixture for cement and soil constructions. It is not an insecticide, it keeps the termite away by creating impervious layers. Totally chloride free, it is an initial setting retarder and high early and final strength giving compound. Polymite is a wonder product. It has all qualities of Polycrete and is an effective antitermite agent. USES AND DOSAGES

1. For Cement and lime constructions:

♦ Use 0.5% solution of Polymite (500 ml in 100 liters of water) for saturating the construction site as follows:

♦ All open surfaces of earth created by excavation for wall footings and isolated footings.

♦ The left over ground surface of the construction site.

♦ This process should be done for 3 consecutive days at 24 hour interval.

♦ Use 0.5% solution of Polymite (200 ml per 50 kg bag of cement or 50 kg lime) for basement floors, Plain Cement Concrete for floors, masonry, plaster on outer surfaces of walls.

♦ Use 0.5% solution of Polymite (200 ml per 50 kg bag of cement) for damp proof coat (DPC). M-20 grade of concrete with 1: 1.5 :3 ratio is recommended for DPC.

♦ Use 10% solution of Polymite (100 ml in 1 liter of water) for saturating the interfacing surfaces of wood and masonry/ concrete for wooden fixtures like door, window and ventilator frames, cupboards, etc.

2. For lawns and parks:

♦ Use 1% solution (1 litre in 100 liters of water) for saturating the soil once on existing wilting (yellowing or drying) grass. Then, use 0.25% solution (250 ml. in 100 liters of water) for saturating the soil every week. Lush green grass would grow.

3. For terrace gardens, kitchen gardens, agricultural fields:

♦ Use 0.25% solution (250 ml. in 100 liters of water) for saturating the soil on 3 consecutive days before plantation.

4. For termite infected plants or trees:

♦ Use 0.5% solution (500 ml. in 100 liters of water) for saturating the roots. Termite infected trunks, branches and leaves should be sprayed with the same solution on 3 consecutive days. With Polymite treatment, the plants become healthy and grow faster.

5. For highly termite infected housing sites:

♦ Holes measuring 75 mm in diameter, 1 meter deep, 1 meter center to center in both directions on the entire construction site should be made and saturated with 1 % solution of Polymite (1 liter in 100 liters of water) on 3 consecutive days.

6. For existing housing sites infected with termites:

♦ Holes measuring 5 mm in diameter, 25 mm deep, 250 mm center to center in both directions on the entire termite affected area such as walls, wooden cupboards embedded in walls and wood-wall interfaces should be made and saturated with 10 % solution of Polymite (1 liter in 10 liters of water) by means of syringes on 3 consecutive days.

Make a Test Yourself

♦ Make a hole of 75 mm diameter, 1 meter deep in a termite infested land. Saturate with 1% solution ofPolymite (1 liter in 100 liters of water) on 3 consecutive days. Treat the dug up earth similarly.

♦ Make another hole of same dimensions. Keep it without any treatment.

♦ Put separate wooden or bamboo elements in both holes and fill them with corresponding dug earth.

♦ Watch the results yourself after any amount of time.