Wireless
Silicon Components have the complete range of products to meet any of your wireless demands. Products & solutions ranging from GSM to proprietary RF modules, We are the one stop shop for your wireless needs.
GSM /GPS
Silicon Components Pvt. Ltd. are a well established GSM & GPS based Solution provider who are in a position to offer a variety of products and services to our customers. Using GSM/GPRS technology we help create a world of possibilities to enhance your connectivity.
GSM/GPRS Products
Our GSM products can be used for the varying applications Such as
• Utility meters readings
• Electronic road displays
• Traffic signal monitoring and control units
• On-board vehicle computers for vehicle tracking
• Mobile dispatch and field service
• Surveillance video cameras
• Data loggers
GPS Products
Silicon Components also offers products for your Navigational & positioning needs. We support products which deliver high-performance, small-profile, low power, and cost-effective embedded GPS receiver solutions to our OEM customers. We have the right technology to deliver the sensitivity, connectivity, noise immunity, low-power and compact size required by the industry for professional applications such as fleet management or asset tracking, anti-theft systems, Time Stamping, Geo-tagging, etc.
U-Blox offers the High Performing U-Blox-6 Positioning engine which offers a variety of features. It Offers both NMEA & UBX protocol outputs via UART, SPI & USB. Some of the Key Features include.
• 50 Channels
• Time to First FIx:
1. Cold Start: 29s
2. Cold Start: 29s
3. Hot Start: less than 1s
• 5Hz Refresh Rate
• A-GPS
• Super Sense
• Kick Start
• High immunity to jamming
GSM / GPRS MODEM
This is a Low cost high quality Serial - Cellular modem that operates over the GSM/GPRS network, offering designers a quick time to market and ease of development. It supports both the GPRS packet-switched and the GSM circuit switched data services.
Users can immediately start designing their system using standard AT commands and quickly Interface it with their system to get it GSM Ready.
Features of GSM/GPRS Modem
• Supports 900 MHz and 1800/1900 Bands
• Supports AT command interface, GSM 07.07, 07.05
• Speeds from 1200 bps to 115200 bps
• Supports point to point MO and MT, SMS cell broadcast, Text and PDU mode.
• Compact size & attractive casing
Peripherals Included
• Power supply - 12V
• Serial Cable
• GSM Antenna
• Casing included.
Intelligent Modems
We offer a unique first of its kind service in to clients who want to equip their equipment with GSM technology.
We undertake custom designs for clients who want an end to end GSM Solution to integrate with their existing system without any or minimal changes. Using the latest technology along with strong technical backing, we are able to provide quality solutions in the fastest possible time; all this keeping in mind the highly price sensitive nature of the Market.
ZIGBEE
Silicon Components has robust and effective solutions in the 2.4 GHz IEEE Std. 802.15.4T spectrum to suit your needs. The MRF24J40 integrated module design from Microchip frees the integrator from extensive RF and antenna design, and regulatory compliance testing, allowing quicker time to market
The MRF24J40MA module is compatible with Microchip's freely available ZigBee®, MiWiT and MiWi P2P software stacks. The Module comes in two versions Standard and Long range which incorporates an onboard power amplifier.
Some of the Features of MRF24J40 Integrated Wireless Module include
• IEEE Std. 802.15.4T Compliant RF Transceiver
• ISM Band 2.405-2.475 GHz Operation
• Supports ZigBee®, MiWiT, MiWiT P2P and Proprietary Wireless Networking Protocols
• Small Size, Surface Mountable
• Integrated Crystal, Internal Voltage Regulator,
• Matching Circuitry and PCB Antenna
• Easy Integration into Final Product - Minimize Product Development, Quicker Time to Market
• Radio Regulation Certification for United States (FCC), Canada (IC) and Europe (ETSI)
• Up to 400 ft. Range & 4000 ft. on long range version
• Integrated Low Phase Noise VCO, Frequency Synthesizer and PLL Loop Filter, RSSI ADC, I/Q DACs & LDO
WIFI & BLUETOOTH
The 2.4GHz Frequency Spectrum Caters to Various technologies. Silicon Components offers all the solutions in this Frequency range.
Roving Networks has high quality, robust, ultra low power embedded Bluetooth and Wifi modules, interface adapters, and other custom platforms to integrate your embedded device, allowing access from Bluetooth and Wi-Fi enabled PCs, PDAs, cell phones, and networks. Roving Networks can greatly reduce your wireless product development cycle times, and take the hassle out of designing, testing, certifying, and manufacturing your products.
Wi-Fi Modules:
RN-131G: 802.11 b/g Ultra low power, surface mount module
The WiFly GSX module is a complete, ultra low power embedded TCP/IP solution. The WiFly GSX is a Full featured and certified (FCC/CE/EN), stand alone, embedded wireless 802.11 b/g networking module. The combination of ultra low power and the ability to wake up, connect to a wireless network, send data, and return to sleep mode in less than 100 milliseconds, allows the WiFly GSX to run for years on two standard AAA batteries. Using only 100mW when awake and 10uW when asleep, this remarkable power efficiency makes possible a new class of internet-enabled products.
Features of WiFly GSX Module Include:
• Ultra low power 4uA sleep, 35mA RX and 200mA max TX
• Host data rate up to 4Mbps for SDIO and SPI and 921K over UART
• Supports Adhoc and infrastructure networking
• UART hardware interfaces
• 10 general purpose digital I/O
• 8 analog sensor interfaces
• Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes
• Accepts 3.3VDC regulated or 2-3VDC battery
• Configuration over UART or wireless interfaces using simple ASCII commands
• Over the air firmware upgrade (FTP)
• Secure WiFi authentication WEP-128, WPA-PSK (TKIP), WPA2-PSK
• Built-in networking applications & On-board TCP/IP stack contains TCP, UDP, DHCP, DNS, ARP, ICMP and FTP protocols
Development Kits
Developers will want to use the RN-131G-EVAL evaluation board for prototyping and designing their WiFly GSX systems. The RN-131G-EVAL kit includes the RN-131G module mounted on a carrier board with status LEDs, power regulation, and a serial link to a PC.
Bluetooth Modules:
RN41- Class 1 & RN 42 Class 2 Bluetooth Modules
The RN-41 & RN-42 are function, form and pin compatible with the each other. The primary difference between the RN-42 and RN-41 is that the RN-41 is a Class 1 device & the RN-42 is a Class 2 device. Supporting multiple Bluetooth profiles such as SPP and HID and simple UART hardware interface, it is simple to integrate into an embedded system or simply connect to an existing device. The modules are FCC and Bluetooth SIG certified making it a complete embedded Bluetooth solution for OEM's adding wireless capability to their products.
RN-41 Class 1 Bluetooth Module
• 250uA in sleep mode while still being
• discoverable and connectable
• 250uA deep sleep
• less than 10mA sniff mode
• 30mA connected
• Range of unto 100 meters
• Class 1 high power amplifier with
on-board ceramic RF chip antenna
RN-42 Class 2 Bluetooth Module
• 26uA in sleep mode while still being
• discoverable and connectable
• 26uA deep sleep
• less than 3mA connected in sniff mode
• 30mA TX
• range of about 50 to 60 feet
• On board PCB antenna
Features of RN-42 Class 2 Bluetooth Module Include:
• Fully qualified Bluetooth 2.1/2.0/1.2/1.1 module
• Bluetooth v2.0+EDR support
• HCI data rates - 1.5Mbps sustained, 3.0Mbps burst in HCI mode
• Sustained SPP data rates - 240Kbps (slave), 300Kbps (master)
• UART (SPP or HCI) and USB (HCI only) data connection interfaces
• Embedded Bluetooth stack profiles included (requires no host stack):
GAP, SDP, RFCOMM, and L2CAP protocols, with SPP and DUN profile support
• Postage stamp sized form factor, 13.4mm x 25.8mm x 2mm
• Castellated SMT pads for easy and reliable PCB mounting
• On board antenna
• Bluetooth SIG qualified & FCC, ICS, CE Certified
• Environmentally-friendly, RoHS compliant
RF Devices
We have the complete Range of RF Devices operating in the ISM band for all types of applications and various frequencies Depending on your requirement of Range, data rate, operating frequency, power consumption, easy of design and cost effectiveness etc we can give a variety of solutions which suits every need. Low power, highly integrated transceivers designed for operation in the ISM frequency bands ranging from 315 - 2.4GHz. Common Frequencies Include: 433 MHz, 868 MHz, 2.4GHz Communication: UART, SPI Range: 30m-1km
Supporting Applications
Low coast Wireless Data Transfer
Wireless Medical Applications
Remote Control / Security Systems
Wireless Sensor Networks
Home Automation
Wire Replacement
Automatic Meter Reading
