78Elastothane

Application Instructions


METHOD OF APPLICATION
New Concrete Surface Cement concrete surface should be free from dust and loose particles. A loose particle should be removed by washing or blown air. Apply WALL PRIME Coat at a spread rate of 90-110 sq.ft/ kg/ coat depending on the porosity of the concrete. Allow 2-4 hrs. to dry, if possible wait 24 hours before application.


Existing/old Concrete Surface
Remove all loosely adhered coatings & other contaminants like algae or fungus. Fill existing cracks with KANFILL (Acrylic Sealant) paintable sealant. Apply WALL PRIME Coat at a spread rate of 90-100 sq.ft./ kg / coat depending on the porosity of the concrete.


Application of ELASTOTHANE
ELASTOTHANE can be applied by airless spray, roller or brush. Apply first coat at a spread rate of 60 -70 Sq ft/ kg. Allow to dry for 5 hours. Apply 2nd coat at a spread rate of 60-70 Sq.ft/ kg per coat. For slopping roofs Reinforce ELASTOTHANE by incorporating a polyester mat of min. thickness of 80 gsm as a part of Sandwich Membrane System. Lay this mat on the first wet coat before application of subsequent coats. System comprises of primer +1 coat of ELASTOTHANE + polyester mat +2coats of ELASTOTHANE For chajjas and parapet wall
Apply 3 coats of ELATOTHANE for extra protecti


Storage Life
12 months in original unopened packaging stored in a cool, dry place out of direct sunlight

Technical Support
KANGARU provides technical advisory service supported by teams of specialists in the field.