Kanfill

Application Instructions

Application Instructions

Joint preparation New Concrete Surface
The joint surfaces must be clean, dry and free from all contamination. Where applicable, appropriate joint filler e.g. closed cell polyethylene foam,
should be used to provide the correct joint depth.

Joint Size Suitability
Joint Width
Minimum 6mm
Maximum 20mm (single application);

Joint Depth
Minimum 10mm on porous substrates
Minimum 6mm on non-porous substrates
Maximum 10mm

Width: Depth ratio (within above min/max restrictions) :- 1:1

Packaging
Plastic canontainer-0.5kg, 1kg, 5kg

Storage Life
12 months in original unopened packaging stored in a cool, dry place out of direct sunlight. Health and Safety
No particular hazards with this product but please consult Material Safety Data Sheet for full information.


Quantity Estimator
Joint Size (mm)      Metres/kg
6×6                            17
9×6                            11
12 x 6                          8
18 x 10                       3.5
25 x 10                        2.5