Ampere Hour Meter With Dosing Control

Offering you a complete choice of products which include Ampere Hour Meter With Dosing Control such as Ampere Hour Meter With Totaliser and Doser Control, Three Doser Control Ampere Hour Meter and Centralize Ampere Hour Meter.

Item Code: IM-2503
Our range of Ampere Hour Meter With Totalizer And Doser Control models offers complete electroplating control for the users. This ampere hour meter provides two relay outputs in order to control the addition of chemicals like additive and brightener. During the process, as more and more charge is derived from the bath, its net concentration decreases. Here, the totalizer count indicates exactly how much charge has been drawn from the bath. After analyzing this count, the ampere hour could be set subsequent to which the chemicals are supposed to be added.

Features

• One set point with relay output rated 230 V / 5 A (resistive)
• Two relay outputs for doser control which operates on totaliser count
• Ampere Hour / Ampere Minute selection
• Ampere hour resolution for lower ampere shunt ratings
• Shunt value programmable at 75mV
• External Reset facility

Item Code: IM-2509
Our range of Ampere Hour Meter is provided with Three Control Relay Outputs to facilitate addition of three chemicals. It should be noted that this feature is improvement over the IM2503 model which offers two control relay outputs to control addition of two chemicals.

Features

• 4 plus 6 digit displays for current flowing, totalizer and present ampere hour
• Three doser control relay outputs with programmable counts
• One set point with one control relay output/li>
• Ampere hour / ampere minute selectable
• Shunt value programmable at 75 mV / 200 mV / 60 mV
• Ampere hour resolution for lower ampere shunt ratings
• Calibration output for ease of calibration

tem Code: IM2513
This model is suited for plants where multiple jobs are being carried out by utilizing independent rectifiers in the same bath. Our range of IM2513 models is a master controller which is connected to multiple IM2502 ampere hour meters and hence adds to the totaliser counts of such ampere hour meters. Further, depending upon the net count, it controls two doser relay outputs to add chemicals like additive and brightener to the bath. Features of this product are listed below:

Features

• 6 digit ampere hour display
• Two relay outputs with set points for external doser control
• Up-to eight ampere hour meters can be connected
• Enable / disable of ampere hour meters connected
• Two wire RS485 interface between master and slave meters
• Distance up-to 500 to 1km between master and slave
• Connects up-to 8 ampere hour meters

Item Code: TE2504
Ampere Hour Meter Module - Model TE 2504 is basically managed for ready setup or the usage can be seen in where the current requirements are low. This one is used which is ready to be applied in the stand alone panel and advanced form all the former models, IM2501, IM2502 and IM2503. These are basically panel mount instruments which are required to rectified in the rectifier or in an independent panel.

Features of Ampere Hour Meter Module are mentioned below:

• Ready to use module, no extra wiring needed
• Additional high power relay provision
• Direct plug in socket for rectifier
• Audio / Visual alarm indication
• Banana plug terminals for connecting shunt
• Auto Manual switch for rectifier control