Fischer Fis V 360EM
▪ Styrene-free, quick-curing high-performance hybrid mortar
(contains vinylester resin and cement).
▪ Resin and cement as well as water and hardener are stored
in two separate chambers and are not mixed and activated
until pushedthrough the static mixer.
▪ Partially-used cartridges can easily be reused by changing
the static mixer.
▪ FIS VW 360 S with accelerated curing especially during winter.
▪ FIS VS 300 T for all standard press guns for sealants.
Advantages/Benefits
- High-performance hybrid mortar for highest loads in almost all building materials.
- Universal fixing system for a broad range of applications on building sites.
- Expansion-free anchoring allows low axial spacings and edge distances.
- Expansion-free anchoring allows low axial spacings and edge distances.
- Ergonomic application guns for quick and easy installation.
- A variety of approvals cover many applications in nearly all building material and guarantee maximum safety.
Approved for anchorings in:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Hollow blocks made from lightweight concrete
- Hollow blocks made from concrete
- Vertically perforated brick
- Perforated sand-lime brick
- Solid sand-lime brick
- Aerated concrete
- Solid brick
- Concrete C12/15 to C50/60 (for rebar connections)
Accessories / Recommended loads
- For fi xing in concrete, see page 81 et seq.
- For fi xing in masonry, see page 87 et seq.
- For fi xing in aerated concrete, see page 97
- For reinforcement bars, see page 101
- Appropriate application guns, see page 111/112
- First injection system world-wide with approvals for concrete, reinforcement bars, solid bricks, perforated bricks and aircrete.
