New AVM offers customized spray dryers, mini spray dryers and spray drying systems in different configurations. The dryers are made to convert liquid solutions/suspensions/slurry/emulsions to powder, granules or agglomerates. The gross advantage of spray dryers is consistent product quality with better control on product parameters like product moisture, bulk density, particle size, dispersion, flow ability etc.
Two Stage Spray Dryer
This two stage spray dryer is equipped with fluid bed dryer for drying products which require longer residence time & product conditioning post drying.
Three Stage Spray Dryer
This three stage spray dryer has an internal fluid bed equipped with fluid bed dryer for producing free agglomerates.
AVM Pilot or mini spray dryer is an ideal tool for laboratory testing, Small-scale powder production requirements and is designed for an evaporation capacity ranging from 3 kg/hr to 60 kg/hr. The AVM pilot spray dryers comprise of Air heating section, Spray chamber, Cyclone separator, Bag filter liquid pumping system, liquid atomization system, air circulation blowers, Control Panel with Instruments.
Spray coolers can convert melted material into solid state. They have the technology of spray cooling systems. The molten matter is sprayed into the spray chamber where the matter is solidified. Cooling media is usually dehumidified cold air. The cooling media in these spray cooling systems is admitted into the Spray Chamber. The spray mist comes in intimate contact with the cooling media & gets converted into solid state.
We specialize in offering our clients flash dryers, which are widely demanded in the global market. In these flash dryers, wet feed is dispersed into the hot air where the material gets dried during conveying travel through the drying duct & separated in the Cyclones or bag filters. Some applications require pre-conditioning of feed by back-mixing of dry product or mixing with oversize particles tapped through particle classifiers installed at suitable locations on the drying duct.
In these dryers, the wet feed is fed into the dryer housing by suitable feeding mechanism above the rotating swirl agitator. The hot air / gas stream is also admitted in the drying duct through specially designed distributor, admitting the air in swirling fashion. The material remains in agitated bed & dried material gets carried forward & separated in the Cyclones or bag filters. Some applications require pre-conditioning of feed by back-mixing of dry product.
Fluid Bed Dryers / Cooler are widely used in the Industry for gentle drying / cooling of free flowing solids.
Perforated plate is used to fluidize the material with the help of air stream. the fluidizer can also be made vibratory to assist the fluidization by imparting mechanical energy. Drying / Cooling media (air / gas) is admitted in the plenum below the perforated plate. Fluidized state enables intensive interaction & of the material & drying / cooling media (air / gas) takes place; hence high rates of heat transfer are achieved. Product residence time can be adjusted through adjustable discharge weir. Product Drying and cooling is possible in single unit .
Rotary Dryers / Coolers are widely used in the Industry for drying / cooling of reasonably free flowing materials. AVM offers Customized Rotary Drying Systems with variety of Configurations.
Tunnel dryers and tunnel drying systems are perfect machines for drying of Granulated / Extruded / Briquettes / Flakes / Fibrous / Pre Formed materials. There are numerous applications of tunnel dryers including Ceramic Fiber Papers, Ceramic Fiber Boards, Molded Paper Products, Rayon Staple, Cotton linters, Noodles, Food products etc. AVM offers Customized Tunnel Drying Systems with variety of Configurations.
A variety of machines(industrial conduction dryers) like tube bundle dryers, rotatory speed dryers, rotor type dryers are used in diverse industries and can be tailored to meet the client's requirement.
Vacuum dryers find extensive usage in the industry for drying a variety of products. These vacuum dryers are perfect to dry heat sensitive products, drying of products in solvents, drying requirements necessitating achievement of very low moisture or low oxygen drying environment in order to optimize oxidation or for explosion prone products. AVM offers custom tailored vacuum drying systems with variety of configurations.
Rotary atomizers are used in spray drying to atomize the feed into fine droplets. Kinetic energy is imparted to the rotary atomizers for atomization of the liquid. The kinetic energy is harnessed from the rotating wheel. The pattern of the droplets of atomized liquid depends upon several factors like liquid properties, disc speed, disc configuration etc. Bulk density of the liquid is also one of the factors for spray dried products. Different atomizer wheel configurations, optimum atomizer speed and optimum relevant feed properties yield desired results.
For industrial drying units New AVM Systech offers custom tailored auxiliary systems. The wide spectrum of such equipment include Air Heaters / Gas Heaters / Hot Air Generator Systems; Exhaust Emission / Pollution Control / Fines Recovery Systems; and Material Handling / Feed & Product Conditioning / Cip Systems. These are custom tailored to meet the client's need and are in accordance with industrial safety and pollution standards. Different types of auxiliaries are manufactured in compatible configurations.
AVM' also undertakes execution of systems for manufacturing of following products, including raw material handling, processing, product finishing & finish product packing sections.
AVM has been involved in offering the clients best quality drying and cooling systems to its customers. Our innovative techniques provide our valued clients complete solution for their industrial drying / cooling process requirements. Our products are easy to install and even more easier to maintain. We understand the needs of our clients and so, we provide them innovative systems at most affordable prices.
