Tapping Saddles

Tapping Saddles are used for installation of air valves on an existing pipeline without asking for an air Tee. A suitable hole is drilled on the barrel of the pipe over which the saddle is fixed. This arrangement is absolutely leak proof and saves on the cost of one air valve tee and one collar coupling. To achieve good performance the branch size should be ¼ th or less than the main Pipe. Tapping Saddles are manufactured as per the requirement of Customer's to suit different types of Pipe.


Dismantling Joint

Understanding the varied need of our client's , we engage in manufacturing an supplying an illustrative Dismantling Joint. It provides the necessary gap between the adjacent piping and Valves to dismantle the existing line. With its high usability and tested quality, it is highly sought among our clientele.

Flexible Collar Couplings
C.I. Jiffy™ Flexible Collar Couplings suitable for joining two plain ends of pipes. It has multiple uses – joins pipes, reverses directions of pipeline, bridges gap in a pipeline. Sizes available from 80 mm to 1000 mm dia.


Patch Clamps

Jiffy™ M.S. Patch Claps are used for repair of longitudinal cracks in DI /CI Pipes. The Clamps has a Rubber Tray which in cases longitudinal cracks for instantaneous repair. Sizes available from 80 mm to 750 mm dia.

Split Collar Cuplin
Design : As per registered Copyright Designs.Material of Construction : In DI (Ductile Iron) as incorporated in ISO & Indian Standards.Material of Sealing Rubber Gaskets : EPDM Polymer - Type 3 of IS: 5382/1985.Hydraulic Testing : As incorporated in Indian Standards / as required by the client.


Flat Rubber Gasket
We offer Flat Rubber Gasket. National-Gaskets offers several flat gaskets, both asbestos containing and asbestos-free, for a wide variety of applications. The types of Gaskets material used depends upon operational stresses and design features, such as the medium to be sealed, operating temperature, internal pressure, assembling conditions and the desired sealing quality. Wherever necessary, appropriate surface treatment and screen printed profiles are provided to enhance seal ability.

Electromagnetic Full Bore Flow Meter
We are instrumental in offering our clients with an immaculate array of Electromagnetic Flow Meter. These meters are stringently tested on varied set parameters to ensure that these are free from defects and flaws. Moreover, these meters can be availed at industry leading prices from us.

Rubber Gasket

Manufacturer of Quality Rubber Gaskets like Push On Joint (Tyton), ‘O’ Rings for C.I.D. Joints & RCC Spun Pipes, MJ Gaskets, Flat Gaskets for Flanged Joints and various other custom made Rubber Gaskets. All Rubber Gaskets will bear ISI Certification Mark and conform to IS: 5382/1985 in Quality. We also possess WRAS Certificate and therefore you are assured that our Rubber Gaskets will never contaminate the flowing drinking water when coming when it comes in contact with them. We also manufacture Glass Separators, Rubber Inserts, Square Gaskets, Rubber Bushes, Rubber Cords, Oil Seals, Anti Vibration Rubber Pads etc.

F.C Gasket

FC Gaskets are designed for Jiffy Collar Coupling and made out of NR, SBR, EPDM Polymers. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Flat Rubber Gasket

Flat Rubber Gaskets (of 3/6mm duel thickness) are designed to make Flanged Joints and are made out of NR, SBR, EPDM Polymers. The thickness around sealing area is kept at 6 mm to account for possible machining irregularities on mating Flanges. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Glass Separator

Glass Separators made out of NR, SBR, EPDM Polymers and are used in Glass Industries.

LRC Gaskets

LRC Gaskets are designed for use in Jiffy Socket Leak Repair Clamps and are specially designed to facilitate permanent repair of leakages in Socket / Spigot Joints in Pipes and Fittings. The Gaskets are normally made out of EPDM Polymer and can also be made out other Polymers. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Modified J - II Gasket

Modified J – II Gaskets are designed for Jiffy II M/J Fittings and are made out of EPDM Polymer. This Gasket used in pipe-fittings industries. Gaskets are available in all standard sizes from 80 mm to 300 mm dia NB.

Tray Type Gaskets

Tray Type Gaskets specially designed for Jiffy MS Patch Clamps used in instantaneous repair of horizontal Cracks in Pipe Lines. The Gaskets are currently made of EPDM Polymer. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Rubber Gasket for M.J Joint

These conical shaped MJ Rubber Gaskets are designed for use in Mechanical Joint pipe fittings and are manufactured out of EPDM Polymer. The Gaskets are interchangeable and are available in all standard sizes from 80 mm dia to 1000 mm dia NB.

Rubber Gasket for Push-on Joint (T-Joint)

Rubber Gaskets for Push on Joint (Tyton Gasket) are made out of NR, SBR, EPDM Polymer and are suitable for jointing Tyton Joint CI / DI Pipes. Gaskets are available in all standard sizes from 80 mm to 1000 mm dia NB.

Sealing O Rings

Rubber O Rings made out of NR, SBR, EPDM, . These Gaskets are used in CI ‘D’ Joints AC Pipes and RCC pressure pipes. Gaskets are available in all standard sizes from 80 mm to 2000 mm dia NB.