Online UPS System
Providing you the best range of Online UPS System such as Online Power UPS System, Online UPS 7.5 KVA-100 KVA and Online UPS Power Flex Series with effective & timely delivery.
Online UPS Power Flex Series
Our range of Online UPS Power Flex Series that are one amongst the significant power support system we offer. This series of power flex online UPS is enriched with many technical specifications.
Features:
- Micro Processor Based IGBT Technology
- Modular Design
- Smart charging enhances the battery life
- Greater than 90% efficiency helps conserve energy
- RS-232, SNMP Interface enhances the control on UPS
- Handles high inrush current where non-liner load is operated
- Friendly user interface on the front panel helps the user
- Low operating noise
- Less than 2% harmonics allows delicate equipments to be powered
TECHNICAL SPECIFICATION for Power-flex series
| MODEL (Rating KVA) |
|
| Input |
|
| Input Voltage |
Single phase 230 VAC, 50 Hz nominal |
| Input Voltage range |
170 - 270 VAC |
| Input Frequency Range |
45 - 55 Hz |
| Output |
|
| Out put voltage |
1 phase 230V+/-1% |
| Output frequency |
50 Hz +/- 0.1% |
| Output Power factor |
0.8 lagging to unity |
| Inverter |
|
| Technology |
High Frequency PWM, IGBT |
| Output over loading |
100% - continuous & 120%/150% for 15 mins/30 seconds |
| Crest factor |
Better than 3 |
| Inverter Efficiency |
> 90% |
| THD |
<2% for linear load, & <3% for nonlinear load |
| Wave form |
Pure sine wave |
| Transient Response |
+/- 5% recovers with in 5 msec for 0 - 100% load |
| Power Walk-in |
20 Secs |
| EMI / EMC |
As per FCC class A |
| Noise (audible) |
40 dB at 1 meter |
| Charger |
CVCC type operates in Boost, Float & Trickle mode |
| Battery |
|
| Type |
SMF, Tubular, Calcium etc |
| DC bus |
|
| Isolation |
Total Isolation between input & output for protection against surges & sags |
| Protection |
Input U/O, Output U/O voltage, Over load, Short Ckt, DC U/O |
| Operating Temp & RH |
0 - 50 degree C & 95% (Non Condensing) |
| Front Panel display |
Battery level, Fault diagnostic, Alarm (LCD Optional) |
| Chassis design |
IP 21 |
| Cooling |
Forced Air |
| Bypass |
Manual bypass switch |
| Static bypass |
|
| Communication Interface |
RS-232, SNMP for Windows optional |
Online UPS 7.5 KVA-100 KVA
Our SMPS(Switch Mode Power Supply) Based Battery Chargers are available in voltage range from 12V to 360V DC that are widely used in various applications such as battery chargings, telephone exchanges (EPABX), communication equipments, HT panel chargings etc. Capable to work as DC – UPS these industrial battery charger
Features:
- Micro Processor Based IGBT Technology
- Modular Design
- Smart charging enhances the battery life
- Greater than 90% efficiency helps conserve energy
- RS-232, SNMP Interface enhances the control on UPS
- Handles high inrush current where non-liner load is operated
- Friendly user interface on the front panel helps the user
- Low operating noise
- Less than 2% harmonics allows delicate equipments to be powered
TECHNICAL SPECIFICATION for Power-flex series
| MODEL |
| 3-7.5 |
3-10 |
3-15 |
3-20 |
3-25 |
3-30 |
3-40 |
3-50 |
3-75 |
3-100 |
|
| Range |
| 7.5 |
10 |
15 |
20 |
25 |
30 |
40 |
50 |
75 |
100 |
|
| Input |
|
| Input Voltage |
Three phase 415 VAC, 50 Hz nominal 4 Wire & ground |
| Input Voltage range |
355 - 455 VAC |
| Input Frequency Range |
45 - 55 Hz |
| Output |
|
| Out put voltage |
1 phase 230V+/-1% or 220V+/- or 110 V +/-1% (only one)* (provide ground) |
| Output frequency |
50 Hz +/- 0.1% or 60 Hz +/- 0.1% optional |
| Output Power factor |
0.8 lagging to unit |
| Inverter |
|
| Technology |
Micro Processor Based High Frequency PWM, IGBT |
| Output over loading |
100% - continuous & 120% / 150% for 15 mins. / 30 seconds |
| Crest factor |
Better than 3 |
| Inverter Efficiency |
> 90% |
| THD |
<2% for linear load, & <3% for nonlinear load |
| Wave form |
Pure sine wave |
| Transient Response |
+/- 5% recovers with in 5 msec for 0 - 100% load |
| Power Walk-in |
20 Secs |
| EMI / EMC |
As per FCC class A |
| Noise (audible) |
<60 dB at 1 meter |
| Charger |
CVCC type operates in Boost, Float & Trickle mode |
| Battery |
|
| Type |
SMF, Tubular, Calcium etc |
| DC bus |
|
| Isolation |
Total lsolation between input & output for protection against surges & sags |
| Protection |
Input U/O voltage, Over load, Short Ckt., DC U/O, Battery Low |
| Operating Temp & RH |
0 - 50 degree C & 95% (Non Condensing) |
| Front Panel display |
Battery level, Fault diagnostic, Alarm (LCD Optional)* |
| Bypass |
Static + Manual bypass switch provided |
| Chassis design |
IP 21 |
| Cooling |
Forced Air |
| Interface |
RS-232, SNMP for Windows & Linux (Optional Feature)* |
Online Power UPS System
Our Online Power UPS System are precision engineered power backup electric equipment that provides continuous support to the electrical systems. These UPS are available in modular designs and made with microprocessor based IGBT technology in order to equip it with smart charging that enhances the battery life. Some of the striking features such as user friendly interface available at the front panel & low operating noise make them a vital product
Features:
- Micro Processor Based IGBT Technology
- RS-232, SNMP Interface enhances the control on UPS
- Handles high inrush current where non-liner load is operated
- Friendly user interface on the front panel helps the user
- Low operating noise
- Less than 2% harmonics allows delicate equipments to be powered
