We are located in the heart of a industrial hub in Pune, very close to Bangalore-Mumbai bypass.

Clamp Support Systems

Step Block - Fine pitch
Hardened & tempered, heat-treated Steel, Blackened.

  • Due to Fine Pitch steps ease in adjustment, as fine as 1 mm adjustment possible, without sacrificing in rigidity of support.
  • Can be used along with step strap clamp

Step Block - Coarse pitch
Hardened & tempered, heat-treated Steel, Blackened.
-Step of 4.5 mm height, quick setting if height setting is not very critical.
-Can be used along with step strap clamp.


Support Height Block
Very useful to support variable clamping height requirement -Avoids dangers & hazardous situations in clamping due to unsuitable support spacers.
-Simple movement gives required parallelism & clamping height.
-We can get required height by stacking the blocks also if required height is more than maximum block size.
-Special rivet head is provided for the location of blocks on one another.


Fine Adjustable Block

  • To be used along with support height block.
  • Helps to achieve precise clamping height.
  • Wedge type construction.
  • Easy Lifting & lowering.
  • Can level work pieces up to 200 kgs


Floating ball-clamping element.

  • Helps clamping free of Distortion
  • Ball surface available in plain or serrated type.
  • Work piece supported on flat contact area of floating, hardened Steel ball, which are free to adjust to the job contour within the socket.
  • The flat surface of the ball readily adapts to the uneven surface of the work piece, hence it avoids strain in clamped position.
  • Machined surface does not spring back upon the release of the clamping force.
  • Most useful for unmachined casting & forging surface


    Plain Jack.
  • Screw, Nut & Body in medium carbon steel.
  • Self lock Screw & Nut made in trapezoidal threads for maximum efficiency & load carrying capacity.
  • Location hole provided to accommodate variety of pads.
  • Pads come in 4 different shapes.

    Wide base Jack.
  • Broad based screw Jack for better stability.
  • Due to broad base more height of screw jack is allowed.
  • Height range from minimum 60 mm to maximum 250 is available with this model.

    Pads for the Jack.
  • Designed to support work pieces of different shapes & sizes.

    Slim Jack
  • Use of plain slim barrel diameter helps support in space constraint as well as to go closer to the work piece.
  • One side Flange Design is used for height up to 200-mm,while double side flange jack for above 200 mm to give better stability to the screw Jack.