We are located in the heart of a industrial hub in Pune, very close to Bangalore-Mumbai bypass.

Injection Mould Machine Clamping Systems

Mould Strap clamp with tapped hole
Hardened steel, Blackodised.
Rear tapping hole for support aec1510 for height adjustment.
Suitable for use on injection mould & press tool clamping.
Front taper provided for ease in side pocket clamping.


Flanged stud with Hex for spanner.
(Plastic Moulding application) We recommend forged flange studs on platen type machines to prevent platen thread damage over allen bolts. studs are fully engaged to platen first to the designed length and then subjected to clamping load. Hence any damages to platen threads are avoided. Which is not the case with allen bolts. Further allen bolt length engagement varies with mould height, hence it can be hazardous to the safety as well as to platen threads if the engagement is less than desired.


Support Bolt

(Plastic Moulding application)
For fast & easy height adjustment. Provided with hex & round base & lock nut.

Plain washer - thick

S.G iron, paint finish
Thick washers for heavy use.

For Other Accessories In Mould Clamping Systems And Also For Different Clamp Versions, Please Refer Following Groups And Use Corresponding

Ordering Codes. For Example Rear Support On Clamp Please Refer
Group - III : Clamp Support Systems

For Various Clamps Refer
Group - II : Top Clamping Systems

Also Refer
Group - I : Basic Clamping Elements