Accessories for Perforated and Bolted Rung Type Ladder Cable Trays
1. Earth Flat Clamp for Ladder Cable Trays
Features
- To avoid welding of Earthing Flats inside the Ladder Tray thus saving space and preventing load and acting as a reinforcement instead.
- Developed for Delhi International Airport (HVAC Project)
2. Sleeve Coupler for Ladder Cable Trays and Perforated Cable Trays
Features
- Used as reinforcement when support span between Ladder Trays or is more or when Ladder Tray/ Perforated Cable Tray sizes exceed 750mm width. (available as an option)
3. Sleeve Coupler with Rung for Ladder Cable Trays
Features
- Used to bridge gaps (Upto 200mm) between 2 Ladder Cable Trays thus eradicating the need to cut a full length Ladder Cable Tray for the same application.
- Developed for Symantec Pune (Server Room).
4. Extra Long Couplers for Ladder Cable Trays.
Features
- Used when the support span between Ladder Cable Trays is more.
- Developed for Hansen Drives Chennai
5. Adjustable Vertical Couplers for Ladder and Perforated Cable Trays.
Features
- Used for minor degree offsets in the upward or downward direction for Cable Trays
6. Adjustable Horizontal Couplers for Ladder & Perforated Cable Trays
Features
- Used for minor degree offsets in the left or the right direction for Cable Trays.
7. Hook Clamp for Ladder Cable Tray
Features
- To hold cables onto the Rung of Bolted Rung Type Ladder Cable Tray™.
8. Split Clamp for Ladder Cable Tray.
Features
- To hold cables onto the C- Strut inserted in place of Rung of Ladder Tray.
9. Cable Binder for Perforated & Ladder Cable Trays
Features
- To bind single cables or a bunch of cables onto Rung of Ladder Tray or Perforated Cable Tray.
10. Hold Down Clamp for Perforated Cable Tray.
Features
- To hold the Perforated Cable Tray onto bottom support in the form of Punched Angle.
11. Hold Down Clamp for Ladder Cable Tray:
Features
- Used for minor degree offsets in the upward or downward direction for Cable Trays
12. Covers for Perforated & Ladder Cable Trays
Features
- Used to shield cables on Perforated Cable Trays as well as Ladder Cable Trays.
- Covers shall be of Pregalvanised Finish (for Hot Dip Galvanized Cable Trays), Powder Coated (Stainless Steel & Aluminum also available).
- Covers shall be Flat or Domed Shape,
13. Offset Reducers for Perforated and Ladder Cable Trays
Features
- Used instead of fabricated reducers when reduction in Cable Tray sizes is up to 300mm.
- Economical as compared to a fabricated reducer.
14. Clamp to fix Raceway on to Side Rail of Ladder Tray.
Features
- Special Clamp which is used to run Ladder Cable Trays and Trunking on the same platform.
- Developed for Microsoft Hyderabad (Server Room).
- Special Design developed which enabled Ladder Cable Trays and Trunking to run on the same platform.