Product Page 6
Features:
- Used a holding device for dial indicator.
- Heavy & rigid construction.
- Base "V" can be clamped to shaft of F20 to F120.
- Fine adjustment for accurate settings.
- Can hold 8mm & 6mm stem diameter of dial.
- Two extension arm gives more flexibility in inspection.
| Cat No. |
BAse Size(mm) |
Main Column |
Extension Arm |
Pull |
| UL-50404 |
65L X 56W X 70H |
Ø18-Ø200 |
Ø18-Ø220 |
90kg |
Features:
- Used a holding device for dial indicator.
- Push botton type ON - OFF switch.
- Can hold 8mm & 6mm stem diameter of dial.
- Light duty dial stand.
| Cat No. |
Base Size(mm) |
Overall Height |
Main Shaft |
Pull |
| UL-50405 |
70L X 48W X 64H |
275mm |
Ø18-Ø210mm |
70 kg |
Features:
- Used a holding device for dial indicator.
- The magnetic base is directly mounted at the back of dial & this assembly can be clamped to any position.
| Cat No. |
Base Size(mm) |
Pull |
| UL-50410 |
Ø56-Ø20 T |
10 kg |
Features:
- Used a holding device for dial indicator.
- Permanent magnet base without ON - OFF.
- Can hold 6mm & 8mm stem diameter of dial.
- Light duty dial stand.
- UL - 50407 has an extension arm.
| Cat No. |
Base Size(mm) |
Overall Height |
Main Saft |
Pull |
| UL-50407 |
Ø41 x 38H |
220mm |
Ø12.5 x 180 mm |
25 kg |
| UL-50408 |
Ø28 x 25H |
90mm |
-------------- |
15 kg |
Features:
- Heavy & rigid construction of base.
- Can be locked to any postion.
- Base "V" can be clamped to shaft off F20 to F120.
- ON - OFF facility.
| Cat No. |
Base Size(mm) |
Overall Height(mm) |
Pull |
| UL-50414 |
56L X 70W X 70H |
500mm |
70 kg |
Features:
- Used a holding device for dial indicator.
- Heavy & rigid construction of base & column.
- Base "V" can be clamped to shaft
- Fine adjustment for accurate settings.
- ON - OFF facility.
| Cat No. |
Base Size(mm) |
Overall Height |
Main Shaft |
Pull |
| UL-50412 |
60L X 50W X 55H |
230mm |
Ø12 x 150 mm |
50 kg |
Features:
- Used a holding device for dial indicator.
- Heavy & rigid construction of base & column.
- Can be locked to any position in 360o by a central lock.
- Dovetail slot for lever type dial.
- Fine adjustment for accurate settings.
- Base "V" can be clamped to shaft off F20 to F120.
- Can hold 6mm & 8mm stem diameter of dial.
| Cat No. |
Base Size(mm) |
Overall Height(mm) |
Pull |
| UL-50413 |
70L X 48W X 64H |
230 |
70 |
Features:
- Used with boring bar for presetting of cutting tool.
- Change in setting of the tool measures variation in bore dimension.
- Suitable clamp is provided for holdinh dial indicator (for UL - 50504 & UL - 50505)
- Powerful magnet with ON - OFF facility.
- "V" is hardened & ground within 5 microns.
- the included angle is 90o
- Hardness 52 - 56 Rc.
- Also manufactured as per customer's requirement.
| Sr. No. |
Cat No. |
Size(mm) |
Slot(mm) |
Range(mm) |
| 1 |
UL-50501 |
72L X 68H X 35T |
14 x 2 |
Ø25-Ø70 |
| 2 |
UL-50502 |
76L X 75H X 35T |
14 x 2 |
Ø35-Ø90 |
| 3 |
UL-50503 |
80L X 75H X 40T |
14 x 2 |
Ø40-Ø105 |
| 4 |
UL-50504 |
100L X 85H X 40T |
14 x 2 |
Ø40-Ø125 |
| 5 |
UL-50505 |
120L X 90H X 40T |
14 x 2 |
Ø110-Ø180 |
Contact Us
UPTECH ENGINEERING
Contact Person- Mr. B. R. Shah Mob: 91-9881075004,
Address : Gat No. 274,Nanekarwadi, Pune - Nasik Highway, Chakan,Tal. Khed
Dist. Pune - 410501,(M.S.) India.
Ph: 91-2135-325004,325554, 306981,
Fax: 91-2135-306982
E-mail: uptechpune1@gmail.com, uptechpune@yahoo.com, uptechengg@yahoo.com
